3-TIE PRESS
The Unbeatable 3-Tie Process
Quite simply, our 3-Tie Press has been the industry standard for the past 20-plus years. It provides a high-volume, low-maintenance press that’s both easy to use and capable of running 24 hours a day with minimal human intervention. It accepts standard 3-tie bales and presses them into a very compact 22" bundle. To make them even smaller, bales can be cut in half in the slice box.
How it works
Occupying a footprint of only 800 square feet, our 3-Tie Press converts standard bales into consistently weighted, compressed and strapped bales, ready for stacking and storage. A single 350HP electric motor and a 1,700-gallon hydraulic reservoir combine with a 14" hydraulic cylinder to generate a pressure of over 500,000 psi. Depending on the hay, it can press up to six bales per minute.
Bales can be pressed on a bale-for-bale basis or weighed to create a consistent bale with a pre-programmed weight. The 3-Tie Press can also be integrated as the back end to one of our Big Bale Cutters to press hay in a single automated process, allowing you to process 3’ x 4’, 4’ x 4’ and 3-tie bales in one machine.
Quite simply, our 3-Tie Press has been the industry standard for the past 20-plus years. It provides a high-volume, low-maintenance press that’s both easy to use and capable of running 24 hours a day with minimal human intervention. It accepts standard 3-tie bales and presses them into a very compact 22" bundle. To make them even smaller, bales can be cut in half in the slice box.
How it works
Occupying a footprint of only 800 square feet, our 3-Tie Press converts standard bales into consistently weighted, compressed and strapped bales, ready for stacking and storage. A single 350HP electric motor and a 1,700-gallon hydraulic reservoir combine with a 14" hydraulic cylinder to generate a pressure of over 500,000 psi. Depending on the hay, it can press up to six bales per minute.
Bales can be pressed on a bale-for-bale basis or weighed to create a consistent bale with a pre-programmed weight. The 3-Tie Press can also be integrated as the back end to one of our Big Bale Cutters to press hay in a single automated process, allowing you to process 3’ x 4’, 4’ x 4’ and 3-tie bales in one machine.
|
Double Press Manufacturing, Inc.
515 NW Cherry Lane Madras, OR 97741 |
TOLL FREE: (800) 876-4149
Tel: (541) 475-4239 Fax: (541) 475-1952 |